The heater control,,, (I'll have to put some clamps on the cable, but appears to work) >
Spinner,, complete>
Mixture control bracket >
|
Firewall Forward |
|
< Back to mounting the oil cooler, It's now on the right
side, and I'll run a SCAT tube down to it.
The heater control,,, (I'll have to put some clamps on the cable, but appears to work) > |
|
|
< I didn't like the fiberglass plenum, I made. So I made one out of aluminum ... approximately 2 inches tall > | |
|
< Basically, installed
Spinner,, complete> |
|
|
< Whirlwind 200RV prop> | |
|
< Throttle bracket, ( I have to work on getting clearance
between the cable and exhaust pipes).
Mixture control bracket > |
|
|
< I put a gascolator in the system. | |
( Engine Baffles ) ( FWF - page 1 ) ( FWF -page 2) [ Cowling ]
[ Home Page ] [ Empennage ] [ Wing Kit ] [ Panel/Interior ] [ Finishing Kit ] [ Misc ]