Fuel Tanks
page 2
  
    
<<Waiting for the stuff to dry.... just need to install the fuel tank's back, inspection plates, and fuel senders..... 

 

Fuel sender for the right tank>>

 
<<Fuel sender - left inverted tank

 

Installing the backing plate>>
<< Checking for leaks... kids blow "bubble stuff" and a balloon.  A short line was attached to the air vent line and then crimped off. >>
 <<The balloon would slowly go down,,,, the "bubble stuff" was applied to find out where the leak was,,,, Identified the leak around the seal on the fuel cap.... I'll correct that later...... (The "bubble stuff" really shows where the air is coming from)

I wired the fuel pickup tube, in order to comply with Van's service bulletin >

[  Page 1 - Wings ] [ Page 2  Wings ] [ Page 3 Wings ] [ Page 4 Wings ] [ Page 5 Wings ]

[ Ailerons & Flaps ] [ Fuel Tank  page 1 ]  Fuel - Tanks page 2

[ Home Page ]   [ Empennage ]  [ Wing Kit ] [ FWF ] [ Panel/Interior ]  Fuselage Kit ] [ Finishing Kit ]  [ Misc ]